Whyte Series F - WFTX3-G1 (Wideband Fibre Transmitter VHT)
The Whyte WFTX range of Optical Fibre Transmitters offer an efficient quality solution for Fibre IRS systems. Whyte Optical Transmitters utilise a single laser per input which are multiplexed (CWDM) for a single optical output. This configuration ensures minimum signal degradation. The V and H SAT inputs are compatible with all Wideband LNB’s and will accept any signals within the 290~2340MHz range. The TERR input 47 ~ 862MHz supports FM, DAB and DTT. The WFTX3-G1 features DC in and DC Output, Laser On/Off switches for V, H & TERR, Variable Slope Control for V, H and TERR and Masthead Power switch for enabling/disabling 12V DC at the TERR RF input. The WFTX3-G1 is a three-laser CWDM device.
Dual wideband satellites can be supported using the loop-in loop-out function (two transmitters) WFTX3-G1 and WFTX2-G2 and their matching receivers. Where a Quattro LNB source is required, Transmitters and Receivers are also used in pairs via their optical loop-in loop-out connectivity. Each individual path is supported by Variable Slope Control (VSC) and can be adjusted to present the flattest output for your Fibre IRS system.
When combined with other products from the Whyte Series F range, large scale FTTH (Fibre To The Home), F TTC (Fibre To The Cabinet) and F TTB (Fibre To The Block) Fibre IRS systems can be successfully implemented.
- 4 Year Warranty
- Wideband SAT Input
- Full band TERR Input
- Variable Slope Control
- RF and Laser Indicators
- Multiple mounting options
- Satellite and TERR Optical Transmitter
- 9dBm Optical Power supporting 64-Way split
- Single laser per input minimal signal degradation
Specifications
| RF Inputs | 2x SAT + 1 TERR / 75Ω Female F-Type |
| Input Frequencies SAT | 290 ~ 2340MHz |
| Input Frequencies TERR | 47 ~ 862MHz |
| RF Input Sequence | V, H, T (left to right) |
| RF Min/Max Input Level SAT | 60 ~ 85dBμV |
| RF Min/Max Input Level TERR | 60 ~ 80dBμV |
| SAT Input Return Loss | >10dB |
| TERR Input Return Loss | >8dB |
| Variable Slope Control SAT | 0 (Flat) to 12 ±1dB |
| Variable Slope Control TERR | 0 to 8 ±1dB |
| RF Input Isolation | >30dB (port to port) |
| RF Input Status | Below Min Input LED = Off |
| Laser type | FDA/CDRH Class 1M |
| Optical Output (SC APC) | 1 |
| Optical Wavelengths | 1530nm (V), 1570nm (H), 1550nm (T) |
| Optical Output Power (Per Laser) | 9dBm |
| Optical Output On/Off | Switch (per laser) |
| Optical Output Status | LED (per laser) |
| Maximum Optical Splits | x64 |
| DC Supply LNB H & V | 18V DC |
| DC Supply Masthead Power MHP | 12V DC (switchable) |
| DC Input | 18V DC |
| DC Indicator | LED On / Off |
| DC Output (Aux) | 18V rated to 2.5A |
| Consumption | 330mA |
| Operating Temperature Range | -10 to 50°C |
| Dimensions L x W x H (mm) | 148 x 190 x 36 |
| Weight | 1130g |
